| THE FOLLOWING APPLICATIONS ARE DESIGNED FOR A RESIDENCE, OFFICE, OR SMALL TO MEDIUM SIZED COMMERCIAL BUILDING. OUR ENGINEERING TEAM CAN DESIGN SYSTEMS FOR BUILDINGS OF ALL SIZES, AND CAN PROVIDE COVERAGE FOR MULTIPLE CARRIERS. FOR LARGE FACILITIES (OVER 15,000 SQ. FT.) PLEASE VISIT: www.cellularsolutions.com |
| WIRELESS SIGNAL BOOSTER / AMPLIFIER with Smart Technology REPEATER OPERATION The BD800AM-B Wireless Signal Booster - Amplifier / Repeater greatly improves signal strength inside a building when using your cellular phone. It does this with no physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna providing the best cellular reception. When the phone transmits it is received by the inside antenna. It is then amplified / repeated to the cell site through the outside antenna. AMPLIFIER FEATURES Maximum 3 Watts Output Power High Power Output Allows More Users On the System Low Cost Solution with Uncompromised Performance Automatic Gain Control to prevent oscillation or overload Automatic Shutdown on overload LED Indicators: Power, Oscillation, AGC FCC Approved AMPLIFIER SPECIFICATIONS |
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
Amplifier Part Numbers
Frequency
Gain (up/down)
Linear Output Power
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain (up/down)
Linear Output Power
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
801105 (50dB)
801106 (60dB)
824-894 Uplink 869-894 Downlink
50 dB / 50 dB
60 dB / 60 dB
+30 dBm
3 Watts
+30 dBm / +30dBm
3 dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC 225 MA max
N-Female 50 Ohms
4.5 x 3.5 x 1.25(inch)
1.5 lbs
801106 (60dB)
824-894 Uplink 869-894 Downlink
50 dB / 50 dB
60 dB / 60 dB
+30 dBm
3 Watts
+30 dBm / +30dBm
3 dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC 225 MA max
N-Female 50 Ohms
4.5 x 3.5 x 1.25(inch)
1.5 lbs
| PRODUCT #801105 / 801106 IN STOCK NOW |
| 800MHz Wireless In-Building Amplifier/Repeater System |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| 1-877-233-6673 |
| 2004-2008 Cellular Solutions Signal Enhancing Specialists, LLC |
| Copyright |
| QUESTIONS OR COMMENTS CAN BE E-MAILED TO SUPPORT@MYCELLULARSOLUTIONS.COM |
| Easy Online Ordering |
| Call a Customer Service Representative toll free at 1-877-233-6673 |
| Large Facilities Click Here Buildings over 15,000 square feet |
