| DUAL-BAND WIRELESS IN-BUILDING REPEATER SYSTEM |
| THE FOLLOWING APPLICATION IS DESIGNED FOR A RESIDENCE, OFFICE, OR SMALL SIZED COMMERCIAL BUILDING AND WILL COVER APPROXIMATELY 1000 SQ. FT. DEPENDING ON THE OUTSIDE SIGNAL STRENGTH. OUR ENGINEERING TEAM CAN DESIGN SYSTEMS FOR BUILDINGS OF ALL SIZES, AND CAN PROVIDE COVERAGE FOR MULTIPLE CARRIERS. FOR LARGE FACILITIES (OVER 15,000 SQ. FT.) PLEASE CLICK VISIT: www.cellularsolutions.com |
| DUAL-BAND WIRELESS SIGNAL BOOSTER / AMPLIFIER with Smart Technology REPEATER OPERATION The Dual-Band SOHO Wireless Signal Booster - Amplifier / Repeater greatly improves signal strength inside a building when using your cellular phone. It does this with no physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna providing the best cellular reception. When the phone transmits it is received by the inside antenna. It is then amplified / repeated to the cell site through the outside antenna. AMPLIFIER FEATURES For 800MHz Cellular and 1900MHz PCS Bands Works on all generations of CDMA, TDMA, and GSM Maximum +30dBm output power Automatic Gain Control to prevent oscillation or overload Automatic Shutdown on overload FCC Approved AMPLIFIER SPECIFICATIONS |
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
| QUESTIONS OR COMMENTS CAN BE E-MAILED TO SUPPORT@MYCELLULARSOLUTIONS.COM |
| 2004-2008 Cellular Solutions Signal Enhancing Specialists, LLC |
| Copyright |
Amplifier Part Number
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
801245
824-894 MHz / 1850-1990 MHz
50 dB / 50 dB
+30dBm
+30 dBm / +10dBm
3 dB / 4dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC 3 A max
FME-Male 50 ohms
5.6 x 3.6 x 1.7(inch)
1.5 lbs
824-894 MHz / 1850-1990 MHz
50 dB / 50 dB
+30dBm
+30 dBm / +10dBm
3 dB / 4dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC 3 A max
FME-Male 50 ohms
5.6 x 3.6 x 1.7(inch)
1.5 lbs
| PRODUCT #801245 IN STOCK NOW |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Easy Online Ordering |
| 1-877-233-6673 |
| Large Facilities Click Here Buildings over 15,000 square feet |
| Call a Customer Service Representative toll free at 1-877-233-6673 |