| iDEN DIRECT CONNECT AMPLIFIED MOBILE SYSTEM |
| Amplifier Part # 814021 Specifically engineered for iDEN network (Nextel / Southern Link / Mike) IN STOCK NOW ! |
| NEXTEL - IDEN SIGNAL BOOSTER DIRECT CONNECT AMPLIFIER OPERATION The Direct Connection Bi-directional Signal Booster - Amplifier & Antenna System improves RF coverage in areas with no signal or low signal strength. It will enable you to increase your phone coverage area up to 50 miles or more. The system reduces drop outs, disconnects and noise while improving voice quality, and can be used in cars, boats, trucks, RV's, and commercial vehicles. The signal is received by the outside antenna from the cell site. The signal is then AMPLIFIED and transmitted into your phone through the adapter. When the phone transmits, the signal is sent to the amplifier through the adapter then AMPLIFIED and sent to the cell site through the outside antenna. AMPLIFIER FEATURES Maximum 5 Watts Output Power on iDEN frequencies Power Control Logic Ensures Maximum Output Power is Within iDEN Standards Can be Used in Fixed or Mobile Applications For Use With Nextel®, Southern LINC® & Mike® FCC and IC Type Accepted AMPLIFIER SPECIFICATIONS |
| REQUIRED COMPONENTS OF iDEN DIRECT CONNECT SIGNAL BOOSTER MOBILE SYSTEM: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
| QUESTIONS OR COMMENTS CAN BE E-MAILED TO SUPPORT@MYCELLULARSOLUTIONS.COM |
| 2004-2008 Cellular Solutions Signal Enhancing Specialists, LLC |
| Copyright |
Part Number
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
814021
806-866 MHz
10 dB / 10dB
5 Watts
+37 dBm / +5dBm
3 dB nominal
+/- 1.5dB / +/-1.5dB
Uplink/Downlink 90dB
12 V.
FME Male 50 Ohms
5.5 x 4.3 x 1.4(inch) or 14.0 x 10.8 x 3.5 (cm)
1.32 lbs or 0.6 kg
806-866 MHz
10 dB / 10dB
5 Watts
+37 dBm / +5dBm
3 dB nominal
+/- 1.5dB / +/-1.5dB
Uplink/Downlink 90dB
12 V.
FME Male 50 Ohms
5.5 x 4.3 x 1.4(inch) or 14.0 x 10.8 x 3.5 (cm)
1.32 lbs or 0.6 kg
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Easy Online Ordering |
| Call a Customer Service Representative toll free at 1-877-233-6673 |
| Large Facilities Click Here Buildings over 15,000 square feet |
| 1-877-233-6673 |
| Due to recent changes with the Nextel Frequencies we ask that you contact a Customer Service Representative at 1-877-233-6673 to inquire about a solutions specific to your needs. |
