| DUAL BAND AMPLIFIED WIRELESS MOBILE SYSTEM |
| Amplifier Part # 801201 Specifically engineered for GSM/TDMA/CDMA cellular networks (Cingular, T-Mobile, Verizon, Sprint, Altell, Etc.) IN STOCK NOW ! |
801201
824-894 MHz/ 1850-1990MHz
40 dB / 40 dB
+30 dBm
3 Watts
+35 dBm / +10dBm
3 dB nominal
+/- 3dB / +/-4dB
Uplink/Downlink more than 90dB
6 V, 3 A
FME Male 50 Ohms
4.5 x 3.5 x 1.25 (inch) or 11.43 x 8.9 x 3.2 (cm)
1.5 lbs or 0.7 kg
824-894 MHz/ 1850-1990MHz
40 dB / 40 dB
+30 dBm
3 Watts
+35 dBm / +10dBm
3 dB nominal
+/- 3dB / +/-4dB
Uplink/Downlink more than 90dB
6 V, 3 A
FME Male 50 Ohms
4.5 x 3.5 x 1.25 (inch) or 11.43 x 8.9 x 3.2 (cm)
1.5 lbs or 0.7 kg
Amplifier Part Number
Frequency
Gain (up/down)
Linear Output Power
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain (up/down)
Linear Output Power
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
| COMPONENTS INCLUDED IN A 800MHz WIRELESS SIGNAL BOOSTER MOBILE SYSTEM: |
| |||||||||||||||||||||||||||||||||||||||
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
| 2004-2008 Cellular Solutions Signal Enhancing Specialists, LLC |
| Copyright |
| 800MHz and 1900MHz WIRELESS SIGNAL BOOSTER AMPLIFIER / REPEATER DESCRIPTION The BD800AM-M Wireless Signal Booster - Amplifier / Repeater greatly improves strength inside a vehicle when using your cellular phone. It does this with no physical connection to your phone. It also allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna. It is then amplified / repeated to the cell site through the outside antenna. AMPLIFIER FEATURES Allows Multiple Phones to be Used Simultaneously Allows Cellular Phone to Operate Properly with All Types of Modulations Including CDMA Maximum 3 Watts Output Power Designed for All Systems Including AMPS, CDMA, EDGE, GPRS, GSM & TDMA Automatic Gain Control Overload Protection Circuit – Protects Cell System from Overload Automatic Reset – if overload occurs FCC Type Accepted AMPLIFIER SPECIFICATIONS |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Easy Online Ordering |
| Call a Customer Service Representative toll free at 1-877-233-6673 |
| Large Facilities Click Here Buildings over 15,000 square feet |
| 1-877-233-6673 |
| QUESTIONS OR COMMENTS CAN BE E-MAILED TO SUPPORT@MYCELLULARSOLUTIONS.COM |
