Cell Phone Adapter Port Hole - Better Reception

ADAPTER INSTALLATION

Back Plug

Plugs into the adapter port on the upper back portion of
your phone. A rubber or plastic plug may need to be
removed. Press firmly to ensure a good connection - do
not twist. Using too much force could damage your phone.

Back Plug w/ Top Replacement Antenna

(Figures 1&2) Unscrew your original antenna which is
blocking the adapter port - may have reversed threads.
(Figure 3) Screw your included replacement antenna into
the top of the phone. Your antenna adapter will now fit into
the back of the phone - see above for Back Plug
instructions.

Bottom Plug

Plugs into the bottom of your cellphone. Push until you
hear a click. Press button(s) in middle or on sides to
release connector from phone. Note: an RF charger may
be available for your phone - it will allow you to charge
your phone while using your external antenna.

Ring

Slide onto the base of your cellular phone's built in
antenna. Press down firmly to ensure a good connection.
Be sure to lower your phone's built in antenna

RF Charger

RF Chargers are antenna adapters that have a built in
battery charger. A single plug into the bottom of your
phone will allow you to charge your phone while using your
external antenna. Without the RF Charger you would have
to unplug your charger to use your antenna.

Sleeve

Snap onto the back of your cellular phone. The sleeve
must be mounted to the top of your phone. The sleeve
may fit upside down but it will not function properly.

Top Plug

Plugs into the adapter port on the top of your phone. A
rubber plug may need to be removed. Press firmly to
ensure a good connection - do not twist. Using too much
force could damage your phone. A small number of top
plug phones require the removal of the original antenna to
expose the port.

Top Replacement Antenna

(Figure-1) Pry off plastic cap. Depress plastic tab inside
hole while forcefully pulling out the original antenna.
(Figure-2) Insert adapter plug into phone with wires facing
phone. (Figure-4) Screw adapter into top of phone.
(Figure-3) You will need this replacement antenna after
disconnecting your antenna adapter.

Top Screw

This antenna adapter replaces your cellular phone's
original antenna. Unscrew your original antenna and
screw in the antenna adapter. Be sure to save your
original antenna - you will need to use it after
disconnecting your antenna adapter.

Side Plug

This antenna adapter replaces your cellular phone's
original antenna. Unscrew your original antenna and
screw in the antenna adapter. Be sure to save your
original antenna - you will need to use it after
disconnecting your antenna adapter.

IF YOU NEED ADDITIONAL ASSISTANCE PLEASE CONTACT A SALES TECH

Easy
Online
Ordering